Magnetic Drawer Series
We are best Magnetic Drawer Series suppliers,we supply best Drawer Magnet for sale.
We are best Magnetic Drawer Series suppliers,we supply best Drawer Magnet for sale.
We are best Electromagnetic Chuck suppliers,we supply best Electromagnet for sale.
We are best Permanent Magnet Lifter suppliers,we supply best Magnetic Lifter for sale.
We are best 24V/220V Lifting Electromagnet suppliers,we supply best Lifting Electromagnet for sale.
We are best Neodymium Magnet With Swivel Hook suppliers,we supply best Magnet With Hook for sale.
We are best Neodymium Rubber Coated Magnet With External Thread Rod suppliers,we supply best Rubber Coated Holding Magnet for sale.
We are best NdFeB Pot Magnet With Hook suppliers,we supply best Neodymium Material for sale.
We are best NdFeB Pot Magnet With Inner Thread suppliers,we supply best Single Side Magnet for sale.
After expanding our production capacity, UNMAG are increasing the warehouse of 1000 square mete...
After expanding our production capacity, UNMAG are increasing the warehouse of 1000 square mete...
Magnet Type: ith Chinese/3M Adhesive
Material Grade: 35~N52
Working Temperature: 0~220°C
Surface Treatment: ikel,Zinc,Epoxy,Gold...
Magnetization Direction: xial,Diametral
Customization: cceptable
Self-Adhesive Neodymium Magnets
Neodymium adhesive magnets offer high performance neodymium coupled with the ultra-strong power of Chinese adhesive or 3M adhesive.
Neodymium Iron Boron (NdFeB) or Neodymium magnets are extremely strong for their size. Shapes include rings, blocks, discs and custom. To prevent unwanted oxidation, neodymium magnets are usually finished with a zinc, nickel or epoxy coating. |
Manufacturing - In general, the elements are melted together and milled into a powder that is dry-pressed to shape in the presence of a magnetic field. |
The material is then sintered, ground to dimension, magnetized and tested. They are called “rare earth” magnets because the elements of neodymium are classified as such in the lanthanides section of the Periodic Table of the Elements.
|
Parameter Name | Parameter Values | Unit |
Curie Temperature | 310~380 | ℃ |
Relative Recoil Permeability | 1.02~1.05 | |
Reversible Temperature Coefficient of Br (20~100℃) | -0.09~-0.13 | %/℃ |
Reversible Temperature Coefficient of Hcj (20~100℃) | -0.4~-0.7 | %/℃ |
Density | 7.50~7.70 | g/cm3 |
Vickers Hardness | 550~700 | |
Bending Strength | -0.09~-0.13 | MPa |
Tensile Strength | ≥80 | MPa |
Compressive Strength | 800 ~1050 | MPa |
Electric Resistivity | 150 | μΩ·cm |
Thermal Conductivity | 8~10 | W/(M·℃) |
Coefficient of Thermal Expansion (Parallel to the orientation) | 5 | 10-6/K |
Coefficient of Thermal Expansion (vertical to the orientation) | -1.5 | 10-6/K |
Young's Modulus | 150~200 | GPa |
Specific Heat(20℃~320℃) | 3.0~4.6 | J/(g·k) |
weight loss(low weight loss products) | ≤2 | mg/cm2 |
Mixing | 1.Mix the ingredients. |
Melting | 2.Dissolve the mixture at high temperature and prepare an alloy. |
Fine pulverization | 3.Turn the alloy into fine powder. |
Molding in a magnetic field | 4.When pressing the fine powder, apply a magnetic field to it and prepare a molded product of powder with aligned directions of magnetization. |
Sintering and heat treatment | 5.Sinter the product at about 1,100℃, and then subject it to heat treatment at about 600℃ to increase its magnetic characteristics. |
Processing | 6.Process the manufactured magnet base material and finish it into the product shape. |
Surface treatment | 7.Subject the product to surface treatment in order to make it rustproof. |
Magnetization | 8.Apply a magnetic field to give the magnet magnetism. |
These Adhesive Magnet are easily fixed in place with screws and are used for discreet door
and drawer closures and for signage and displays.
Regarding of magnetic properties of Sintered NdFeB Magnet, Please click here.
For your different application,different grade/series for your choice.For application in normal life,N series is enough.
Different Series correspond to different working temperature.
Grade | Max Operating Temperatures | |
Series | Grade Range | |
N Series | N35-N52 | 80°C |
M Series | 35M-52M | 100°C |
H Series | 33H-48H | 120°C |
SH Series | 30SH-48SH | 150°C |
UH Series | 30UH-42UH | 180°C |
EH Series | 30EH-38EH | 200°C |
AH Series | 30AH-35AH | 220°C |
Physical Properties & Application to Environment of the Coating
Coating Material | Colour | Properties | Environment of Application | Thickness of |
Zinc | Blue, Black and rainbow etc | Compact, Stable and Homogeneous | With reasonalbe capability of anticorrosion | 6um≤∮≤12 |
Nickel-Copper-Nickel | White and black | Light and Stable | Suitable for higher corrosive environment | 15μm≤∮≤30pm |
Phosphorization | Colorless or light gray | uniform thickness | short-term anticorrosion | - |
Epoxy | Black and Gray | layer with certain luster, insurability | Suitable for higher corrosive environment | ≥15μm |
Parylene | transparency | uniform thickness, density pinholes-free and insurability | Excellent capability of anticorrosion especially for small items | 0.1μm≤∮≤100pm |
Ni+Cu+Epoxy | Black | Layer with certain luster | Excellent capability of | 10-30μm |
anticorrosion. Suitable for | ||||
hostile environment | ||||
salt spray resistance>300hr | ||||
Al+Epoxy | Black | Layer with certain luster | Excellent capability of | 15-35μm |
anticorrosion. Suitable for | ||||
hostile environment | ||||
salt spray resistance>650hr Widely used in new energy | ||||
auto magnets |
For more details,welcome to contact with our sales engineers. |